*************************************************
PTC, Inc. 2018
Sample U-CON Profiles
*************************************************
The User Configurable (U-CON) driver for KEPServerEX allows users to quickly and easily create a device driver for serial and Ethernet devices for which an off-the-shelf driver is not available (including barcode readers, weigh scales, various sensors, and RTUs). Its intuitive interface was designed for the non-programmer. Users only need a basic knowledge of protocols, the protocol manual, and the device to get started. OPC and other proprietary client interface technologies are handled within KEPServerEX, simplifying client-side communications. The U-CON driver supports all feature sets available within the KEPServerEX communications platform.

*************************************************
Requirements:

1. KEPServerEX V5.21 and higher

*************************************************
Instructions:

1. Extract the contents of the ****.zip file

2. Launch the KEPServerEX Configuration and then select File | Open to open the .opf project file.

3. The amount of instructional information with the U-CON Typical Application profiles vary.

   - Review the instructions or profile information included in each .zip file.


*************************************************
Disclaimer:
All example code is provided by Kepware and contributors AS IS and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall Kepware or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage. Kepware disclaims responsibility for any errors or omissions arising in connection with engineering in which its software, information, or assistance is used. Questions with regard to example code or application development fall under the category of application assistance and not product support. By downloading and using the example code, you are stating that you have read, understand, and agree with the terms and conditions outlined in this disclaimer.

*************************************************
PTC, Inc. 2018
*************************************************